ALL Bike Components

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

- Ammonium/latex/protein free sealant

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

These Shimano-compatible 8-speed shifters feature comfortable ergonomics, easy installation, and durability you can rely on. Whether you're replacing a broken shifter, doing a drop bar conversion, or building from scratch, these well-constructed shifters will do the trick. - Includes cable and housing - Separate, dedicated lever for upshifts and downshifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Compatible with Shimano 8-speed road systems - 1 x 8-speed left lever has no shifter parts for a clean, dedicated 1x road setup

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chains - Material: Aluminum

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

The first thing to know about the XX Eagle Transmission chain is that it’s one of the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top shape that maximizes shifting performance. The chain features a hollow pin design and is finished in a long-wearing, high durability chrome - Long-wearing hard chrome finish - Smooth shift bottom profile for ultimate shifting performance - Hollow pins save precious grams of weight - Includes PowerLock connector

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

Lou is the 26 x 4.8" rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl, and claw its way over rooty, rocky, wet, muddy, loose, or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled, 120tpi which conforms well to the ground surface shape. - Folding Kevlar bead - Tubeless Ready

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")