Filter By:
Headsets
$52.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$79.99 - $84.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$99.99 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.
- Designed to bridge the gap between the 40-series and 110-series headsets
$119.99
Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence.
-Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between
-Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference
-7075 T6 Aluminum construction
-Sealed, stainless-steel Hellbender bearings
$53.00
- Bearing Type: Cartridge
- Weight: 86 g
- Crown Race: 40
- S.H.I.S Lower: IS52
- S.H.I.S Upper: IS42
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$66.00
- Bearing Type: Cartridge
- Weight: 125g
- Crown Race: 40
- S.H.I.S. Lower: ZS56
- S.H.I.S. Upper: ZS44
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$78.00
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings.
- Classic shape with modern styling for high-end road bikes
- For threadless steerers
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- Laser etched aluminum top cap
- Weight: 82g
$88.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
- Weight: 89g
$123.00
The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups.
- Stainless steel Angular Contact Bearings
- Stainless steel crown race
- 1.5'' patented alignment tip for increased durability and performance
- Deep Cup model has 22mm insertion of upper and lower cups
$54.95
The 1-1/8" Ritchey Comp Cartridge Logic Threadless Headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion.
- Smaller upper bearing to save weight
- Lightweight, precision-machined aluminum cups
- Deep cups for solid insertion
- Stack Height: 30.2mm
- Material: Steel
- Upper Fit (S.H.I.S.): EC34/28.6
- Lower Fit (S.H.I.S.): EC34/30
- Bearing: Semi cartridge
$74.95
The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design that promises minimal penetration from the elements.
- Bearing: Sealed cartridge (ACB) - Ti coated
- Material: Alloy
- Stack Height: 28.3mm
$63.99
Service and replacement parts specifically for Trek Knock Block technology.
Genuine replacement parts
Get your bike back on the trail with the headset parts you need.
- Trek proprietary headset components compatible with Trek Knock Block models
- 72-degree headset fits 2021 Slash 29
- Includes crown race, bearings, top cover, frame chip & fastener
- Frame chip has display tabs to connect Bosch Kiox Mount sold separately
- Must be paired with Knock Block stem and Knock Block spacers
- Knock Block headset spacers not included
Page 1 of 1